Filter
Top Products
10
Creating & Saving Personalized Settings
The goLITE P1 will allow you to store up to three different personalized settings (A, B, or C). Each pro-
gram can be set to run for a specific time, and intensity. Note: before you can run a personalized setting,
you must first program your personal settings into the device.
To Create or Change a Personalized Treatment
Note: Power must be turned on before programming.
1. Press and hold “PROGRAM” until the word (Program) on the display begins to blink.
2. Press “+ -” to choose either A, B, or C for your program.
3. Press “PROGRAM” button again, the word “TIMER” and minutes will begin to blink.
4. Press “+ -” buttons to select the desired time of use.
5. Press “PROGRAM” button again, and the intensity bars will begin to blink.
6. Press “+ -” buttons to select your desired intensity.
7. Press “PROGRAM” button again to store the personalized treatment.
Note: Up to 3 different treatments can be stored or changed by repeating the steps above.
Running a Personalized Treatment
Press “PROGRAM” button and the letter (A, B, or C) will begin to blink. Press the “+ -” buttons to
select the program you wish to run. The program will start by pressing “PROGRAM” again, or after a
three-second delay.
Using Your goLITE
®