Filter
Top Products
16. Battery pack removal and preparation for recycling:
WARNING: Upon removal, cover the battery pack’s terminals with heavy
duty adhesive tape. Do not attempt to destroy or disassemble battery pack
or remove any of its components. Nickel-Metal Hydride batteries must be
recycled or disposed of properly. Also, never touch both terminals with
metal objects and/or body parts as short circuit may result. Keep away
from children. Failure to comply with these warnings could result in fire
and/or serious injury.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS INTENDED FOR COMMERCIAL USE
1. Models AGRC/AGR+ can be used with either the cord pack or the
battery.
2. Remove the transformer wall plug and clipper from the carton.
3. With the clipper in the off position, insert the adapter plug into
the bottom of the clipper. Note that the adapter plug is fitted with
a tongue to align properly with the groove in the clipper. Once
the adapter plug and clipper are aligned, press firmly together.
You may hear a click as the adapter plug contacts engage.
4. Plug the transformer wall plug into the AC outlet as identified on
the carton.
5. The clipper is now ready to be used.
See page 6 for clipper use
Tongue
Adapter
Plug
Transformer
Wall Plug
Model AGRC Cord Pack Use
2