Filter
Top Products
E-7
SYSTOLIC
DIASTOLIC
PULSE
5.
Press the START 1 or START 2 button. Your average blood
pressure reading will appear with the number of measurements
stored in memory (i.e. A25 = total of 25 measurements stored in
memory). As the cuff pressurizes, measurement will begin and
the Cuff Inflation Meter will show on the display screen. It is
normal for the cuff to feel very tight.
NOTE: If viewing measurements or storing readings in
memory are not desired, press both the START 1 and START
2 buttons at the same time. A reading will be taken, but not stored into
memory.
NOTE: To stop inflation at any time, press either START button.
6. As the cuff is inflating, the ❤ will appear to indicate that the measurement is
in progress. The monitor measures your blood pressure while the cuff is
inflating, so remain still. Once the pulse is detected, the symbol will flash
with each pulse beat.
7.
When measurement is complete, the systolic and
diastolic pressure and pulse rate readings are
displayed. The cuff will automatically deflate
completely, releasing any remaining air.
8.
Press START button once to turn off power. The
device has an automatic power-down feature which
turns off power automatically one minute after
measurement is obtained.
For the most useful blood pressure history, we recommend that you record the
date and time after each measurement. The most accurate history relies not on a
single or sporadic readings, but on a consistent monitoring pattern over time.
NOTE: If you wish to take your blood pressure measurement again, relax
and wait 5 minutes to enable the flow of blood in the arm to return to
normal.
NOTE: If you have poor blood circulation in winter (especially when
your hands and wrists are cold), you may not get a blood pressure
measurement.
TAKING YOUR BLOOD PRESSURE
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991