Filter
Top Products
E-5
A&D Medical (Toll-Free): 1-888-726-9966
E-6
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
WHAT DISPLAY SYMBOLS MEAN
Symbols that are printed on the device case
Symbols Function / Meaning Recommended Action
Standby and turn the device on.
Battery installation guide
Direct current
SN Serial number
Date of manufacture
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shock.
EC directive medical device label
WEEE label
Manufacturer
EU-representative
Symbols that appear on the display
Symbols Function / Meaning Recommended Action
Appears while measurement is in
progress. It blinks when the pulse is
detected.
Measurement is in
progress. Remain as still
as possible.
Irregular Heartbeat symbol (I.H.B.)
Appears when an irregular heartbeat
is detected during measurement.
TriCheck mode
Takes three consecutive
measurements automatically and
displays the average values of the
three measurements.
Appears when a body or arm
movement is detected.
The reading may yield
an incorrect value. Take
another measurement.
Remain still during
measurement.
R6(AA)
2010
0366
EC REP
WHAT DISPLAY SYMBOLS MEAN
Symbols Function / Meaning Recommended Action
Appears during measurementwhen
the cuff is applied loosely.
The reading may yield an
incorrect value. Apply the
cuff correctly, and take
another measurement.
Previous measurements stored in memory
Average data
Full Battery
The battery power indicator during
measurement.
Low Battery
The battery is low when it blinks.
Replace all batteries with new
oneswhen the mark blinks.
Unstable blood pressure due to
movement during measurement.
Take another measurement.
Remain still during
measurement.
Thesystolic and diastolic values are
within 10 mmHg of each other.
Apply the cuff correctly,
and take another
measurement.
The pressure value did not increase
during the inflation.
The cuff is not applied correctly.
PUL. DISPLAY ERROR
The pulse is not detected correctly.
Blood pressuremonitor internal error
Remove thebatteries and
press theSTART button,
and then install the batteries
again. If the error still
appears, contact the A&D.
SYS.
Systolic blood pressure in mmHg
DIA.
Diastolic blood pressure in mmHg
PUL./min.
Pulse per minute
AM
Data taken between 4:00 and 9:59
PM
Data taken between 18:00 and 1:59
Pressure settings
Indicates the pressure value as set
by the user.