A&D SK-10KWP Scale User Manual


 
- 1 -
SAFETY PRECAUTIONS
All safety messages are identified by the following, “
WARNING
” or
CAUTION
”, of ANSI Z535.4 (American National Standard Institute:
Product Safety Signs and Labels). The meanings are as follows:
WARNING
A potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
A potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
This manual is subject to change without notice at any time to
improve the product.
Product specifications are subject to change without any obligation
on the part of the manufacturer.
When using the SK-WP, the following safety precautions should
always be followed.
WARNING
Use only the specified AC adapter for the scale. Other
adapters may cause damage. (AC adapter is optional.)
Internal service or adjustment to this product should be
performed by a qualified person.
CAUTION
Avoid installing the scale in direct sunlight, which may cause
discoloration or malfunctions.
Do not mix battery types, or new and old batteries. Replace
with all new batteries at the same time.
If the scale is not to be used for a long period of time, remove
all batteries from the battery compartment to avoid leakage.
Avoid overloading to the scale.
Avoid using the weighing platform to move the scale, as that
could cause damage to the scale.
Avoid chemical solvents. Clean the scale with water.
When the scale is used with an AC adapter, the scale does not
conform to IP65 protection.
IP65
Degrees of protection against water: Protected against water jets.
Degrees of protection against solid foreign objects: Dust-tight.
International Protection of IEC529.