Filter
Top Products
6
temperature is trending.
10. When the Current Temperature of the food reaches the Desired
Temperature the thermometer/pager (if in use) will beep and temperatures
on the display will ash.
11. Press “
” button to silence the thermometer alert, or press “ ” button to
power OFF the thermometer/pager.
Be careful when touching the temperature probe and probe wire if it has been
in or near hot food or surfaces.
Remote Pager Setup
The Remote Pager can receive alerts from the thermometer when the Desired
Temperature is reached.
1. Press “ ” button on the Remote Pager to power ON.
2. Pager emits an audible chirp and the Power indicator (red) ashes until a
signal is established.
3. Power indicator (red) remains lit when a good connection is established and
maintained, indicating that the pager is ready for use.
4. When the desired temperature is reached, the Power indicator (red) and
Status indicator (green) will ash and audible alerts will sound on the
Remote Pager unit until the “
”
button is pressed.
Timer
The thermometer features a countdown/countup timer.
To count down:
1. To adjust the countdown time, press the “MIN” and “SEC” buttons, located
on the thermometer display. To clear an entry press the “MIN” and “SEC”
buttons simultaneously.
2. Press “START STOP” button when desired time is set, and the timer will begin
the countdown.
3. When 00:00 is reached, thermometer/pager (if in use) beeps until “ ” is
pressed or “MIN” and “SEC” buttons are pressed simultaneously.
To count up:
Press “START STOP” button, and the timer will begin counting up.
Power the Unit ON/OFF
Press the “ ” button to turn the thermometer display ON. To power off
manually, press the “ ” button.
The thermometer will automatically power off after 4 hours of temperature
readings below 100ºF. The pager will automatically power off after 1 hour
without a wireless connection to the thermometer.