AC International AC2CIG Styling Iron User Manual


 
USER MAINTENANCE
INSTRUCTIONS
This appliance requires little
maintenance. It contains no user-
serviceable parts. Do not try to
repair it yourself. Contact a
qualified appliance repair
technician if the product
requires servicing.
Cleaning
WARNING: Always be sure
Curling Iron is turned off,
unplugged, and completely
cool before cleaning.
1. Wipe plastic surfaces with a
damp, soapy sponge.
2. For dust or dirt from the hair’s
natural oil or conditioner build
up on Barrel, use a sponge with
a small amount of shampoo.
3. Wipe remaining shampoo off
Barrel with a clean damp
sponge.
4. Do not immerse in water or any
other liquid.
5. Make certain the Curling Iron is
completely dry before using.
Keep heated surfaces of the
Curling Iron clean and free of
dust, dirt, and styling products.
Storage
NOTE: When not in use,
make sure the Curling Iron is
unplugged.
1. Slide the POWER Switch to the
OFF position. The red POWER
ON Light will turn off.
2. Unplug the Power Cord from
the electrical outlet.
3. Allow the appliance to cool
completely. Once the Curling
Iron is cooled, store in a cool,
dry location.
5. Never wrap the Power Cord
around the Curling Iron, as this
will cause the cord to wear
prematurely and break. Check
the Power Cord for wear and
damage regularly, particularly
where the cord enters the
appliance and the plug.
CAUTION: If the cord of this
appliance becomes damaged,
refer to the Service and Repair
section of the warranty.
8
AC1CI & AC2CI.qxd 9/18/2003 4:50 PM Page 8