3M 9211 Respiratory Product User Manual


 
3M
TM
Particulate Respirator 9210 and 9211, N95
3062
page 2 of 2
Use For:
• Solids such as those from textile
operations, dry chemical
handling, surface preparation,
food preparation and handling,
woodworking, grain handling and
milling, processing minerals and
coal and certain other substances.
• Liquid or non-oil based particles
from sprays that do not also emit
harmful vapors.
Do Not Use For:
Gases, vapors, including those
present in paint spraying operations,
oil aerosols, asbestos, arsenic,
cadmium, lead, 4,4'-methylenedianiline
(MDA) or sandblasting. Aerosol
concentrations that exceed 10 times
the OSHA PEL, or applicable
exposure limits, whichever is
lower. This respirator does not
supply oxygen.
Important
Before using these respirators,
you must determine the following:
1. The type of contaminant(s)
for which the respirator is
being selected.
2. The concentration level
of contaminant(s).
3. Whether the respirator can be
properly fitted on the wearer’s
face. Do not use with beards,
on other facial hair, or other
conditions that prevent a good
seal between the face and the
faceseal of the respirator.
4. Before use of these respirators,
a written respiratory protection
program must be implemented,
meeting all the requirements
of OSHA 29 CFR 1910.134,
including training, medical
evaluation and fit testing.
Time Use Limitation
If respirator becomes damaged,
soiled, or breathing becomes
difficult, leave the contaminated
area immediately and replace
the respirator.
Additional Information
This respirator contains no
components made from natural
rubber latex.
3M Occupational Health and Environmental Safety Division
3M Center, Building 235-2W-70
St. Paul, MN 55144-1000
For more information, please contact:
3M Occupational Health and
Environmental Safety Division
(OH&ESD)
In the U.S., contact:
Sales Assistance
1-800-896-4223
Technical Assistance
1-800-243-4630
Fax On Demand
1-800-646-1655
Internet
http://www.3M.com/occsafety
For other 3M products
1-800-3M HELPS
In Canada, contact:
3M Canada Company, OH&ESD
P.O. Box 5757
London, Ontario N6A 4T1
Sales Assistance
1-800-265-1840, ext. 6137
Technical Assistance (Canada only)
1-800-267-4414
Fax On Demand
1-800-646-1655
Internet
http://www.3M.com/CA/occsafety
Technical Assistance In Mexico
01-800-712-0646
5270-2255, 5270-2119 (Mexico City only)
Technical Assistance In Brazil
0800-132333
Fax On Demand O.U.S. Locations
1-651-732-6530
Respirators Respirators
Per Box Per Case
20 240
Respirators Respirators
Per Box Per Case
10 120
Advanced Electret Media
Advanced electrostatically
charged microfibers
help make breathing
easier and cooler.
Three-Panel
Designed for comfort
and convenience.
3M
TM
Cool Flow
TM
Exhalation Valve
Patented one-way valve for
easy exhalation and cool,
dry comfort.
9210 9211
Technologies (Check marks indicate technologies featured in these products.)
3M Particulate Respirator
9210, N95
3M Particulate Respirator
9211, N95
✓✓
TM
.com
Distributed by:
(888) 933-0100