Filter
Top Products
2
This respirator helps protect against certain particles. Misuse may result in sickness or
death. For proper use, see supervisor, or User Instructions, or call 3M in U.S.A., 1-
800-247-3941. In Canada, call Technical Service at 1-800-267-4414.
IMPORTANT
Before use, wearer must read and understand these User Instructions. Keep these instructions for
reference.
Use For
Solids such as those from processing minerals, coal, iron ore, flour, and certain other substances. Liquid
or non-oil based particles from sprays that do not also emit oil aerosols or vapors.
Do Not Use For
Gases and vapors, including those present in paint spraying operations, oil aerosols, asbestos or
sandblasting. This respirator does not supply oxygen.
Use Instructions
1. Failure to follow all instructions and limitations on the use of this respirator and/or failure to wear this
respirator during all times of exposure can reduce respirator effectiveness and may result in sickness
or death.
2. Before occupational use of this respirator, a written respiratory protection program must be
implemented meeting all the requirements of OSHA 29 CFR 1910.134 such as training and fit testing
and applicable OSHA substance specific standards. In Canada, CSA standard Z94.4-93 requirements
must be met.
3. The particles which can be dangerous to your health include those so small that you cannot see them.
4. Leave the contaminated area immediately and contact supervisor if dizziness, irritation, or other
distress occurs.
5. Store the respirator away from contaminated areas when not in use.
6. Dispose of used product in accordance with applicable regulations.
Use Limitations
1. This respirator does not supply oxygen. Do not use in atmospheres containing less than 19.5%
oxygen.
2. Do not use when concentrations of contaminants are immediately dangerous to life and health, are
unknown or when concentrations exceed 10 times the permissible exposure limit (PEL) or according
to specific OSHA standards or applicable government regulations, whichever is lower.
3. Do not alter, abuse or misuse this respirator.
4. Do not use with beards or other facial hair or other conditions that prevent a good seal between the
face and the sealing surface of the respirator.