A SERVICE OF

logo

Open as PDF
next previous
10
Introduction / Getting started
Turning the TV on
Switching on the TV
Connectthepowercordtoawalloutlet,the
!powerindicatorlightsinred(standbymode).
1 Press
ontheremotecontrolor!onthe
TVrightsidepanel,the!powerindicator
lightsingreen.
Note:
Ifyouwatchblackandwhiteprogrammeswhen
the Colour SystemmodeissettoAuto,colour
noise may appear on the screen. In this case
select the appropriate Colour System (For the
system of each country or region, refer to pages
13, 31).
Switching off the TV
1 Press
ontheremotecontrolor!onthe
TVrightsidepaneltoswitchtothestandby
mode.
Notes:
•WhentheTVwillnotbeusedforalongperiod
of time, such as during vacation or travel,
removethepowerplugfromthewalloutlet.
•TheTVwillautomaticallyturnitselfoffafter
approximately 15 minutes if it is tuned to a
vacant channel or a station that completes its
broadcastfortheday.Thisfunctiondoesnot
workinexternalinputorBluescreenOffmode.
TheTVwillautomaticallyturnitselfoffafter
approximately 2 hours if you do not operate the
TVafterturnedonbyontimerfunction.
•IfpoweriscutoffwhileyouareviewingtheTV,
the Last Mode Memory function turns on the
TVautomaticallywhenpowerisappliedagain.
Ifpowerisgoingtobeoffforalongtimeand
youaregoingtobeawayfromyourTV,unplug
thepowercordtopreventtheTVfromturning
on in your absence.
Tuning the TV for the first time
BeforeswitchingontheTV,putyourdecoderand
mediarecordertostandby,iftheyareconnected,
andensurethattheaerialisconnected.Tosetup
theTV,usethebuttonsontheremotecontrolas
detailedonpage9.
1 Pressthe
button.TheQuick Setup
screenwillappear.Thisscreenwillappear
thersttimethattheTVisswitchedon.
Quick Setup
Language English
2 Pressv orwtoselectthemenulanguage
(English,Chinese(CS),Malay,Thai,
Vietnamese,Russian,Arabic,Persianor
French).
3 PressQ,todisplaytheLocationmenu(-
page13).
Pressv orwtoselectStoreorHome.For
normalhomeuse,selectHome.
Location
Home
To use the TV for displaying in
a store showroom, please select [Store].
[Home] mode is recommended
for normal use.
Store mode:
AutoViewmenuisnotavailable.
4 PressQtodisplaytheAutoViewmenu(-
page16).
Pressv orwtoselectYesorNo.
AutoView
Yes
AutoView mode automatically
adjusts picture settings to suit
ambient light conditions. Do you
wish to enable AutoView mode?
5 PressQtodisplaytheAuto Signal Booster
menu(-pages12,13),andthenv orwto
selectYesorNo.
Auto Signal Booster
Yes
Signal Booster boosts weak analogue broadcast signals.
If you select [Yes], the TV will automatically set this
feature to [On] or [Off] according to signal strength.
Do you wish to enable automatic control?
Yes mode:
Thisfunctionperformsautomaticdistinction
ofOnorOff.
6 PressQtodisplaytheAuto Tuningstartup
screen.PressQtostarttheautomatic
search.
Auto Tuning
Progress
Found
1% 0
Whentheautomaticsearchiscompleted,
theTVwillautomaticallyappeartheManual
Tuningmenu(-page13).