8
HL66 (E/F) Web 213:276
Chapter 2: Using the remote control
Learning about the remote control
The buttons used for operating the TV only are described here.
For a complete list of the remote control’s functions, see the
remote control functional key chart (- page 10).
Note: The error message “NOT AVAILABLE” may appear if
you press a key for a function that is not available.
1 POWER turns the TV on and off. When the TV is on, the
blue LED indicator on the TV front will be illuminated.
2 FREEZE freezes the picture. Press again to restore the
moving picture.
3 SLEEP accesses the sleep timer (
- page 39).
4 PIC SIZE cycles through the five pictures sizes: Natural,
TheaterWide 1/2/3, and Full (
- page 26).
5 Channel Numbers (0–9, –/100) directly tune
channels. The = button is used to tune digital channels
(
- page 25) or to display the favorite channel list
(
- page 18).
6 INPUT selects the video input source (
- page 22).
7 CH Bb cycles through programmed channels when no
menu is on-screen (
- page 17), and functions as page up/
down when a menu is on-screen.
8 VOL + – adjusts the volume level.
9 HOME (~) accesses the Home function of the Channel
Browser
™
feature (- page 25).
10 RECALL displays TV status information (- page 39).
11 CH RTN returns to the last viewed channel (- page 25).
12 MUTE reduces or turns off the sound (- page 31).
13 3C / #c While watching TV, these buttons open the
Channel Browser
™
and tune to the previous/next channel
in the History List (- page 23). (Also see “Arrow
buttons.”)
14 Arrow buttons (BbC c) When a menu is on-screen,
these buttons select or adjust programming menus. (Also
see 3C/ #c.)
15 FAV Bb tunes to the next higher/lower favorite channel
(- page 18).
16 ENTER activates highlighted items in the main menu
system.
17 MENU accesses the main TV menu system (
- pages 14
and 15).
18 EXIT closes on-screen menus.
19 MODE SELECT Switch switches between TV,
CABLE/SAT, DVD, and VCR modes (
- page 9). Set to
“TV” to control the TV.
2632HL66_EN.book Page 8 Tuesday, July 18, 2006 3:47 PM
