29
Introduction
Connecting your TV
Setting up your TV
Using the TV’s Features
Appendix
Selecting the video input source
Press TV/VIDEO to view a signal from another device connected to
your TV, such as a VCR or DVD player. You can select ANT, VIDEO 1,
VIDEO 2, ColorStream HD, HDMI or PC depending on which input
jacks you used to connect your devices (see “Connecting your TV” on
page 9).
Pressing TV/VIDEO on the remote
control displays the current signal
source (press TV/VIDEO again or
0-5 to change)
Please note the following regarding
the HDMI source selection:
The HDMI IN jack is not intended for
connection to and should not be used
with a PC (personal computer). See
“Connecting an HDMI or a DVI device to
the HDMI input” on page 15 for details.
SELECT:[0-5]
SOURCE SELECTION
0. ANT
1. VIDEO1
2. VIDEO2
3. ColorStream HD
4. HDMI
5. PC
8. Repeat step 7 to enter the rest of the characters.
If you would like a blank space in
the label name, you must choose
an empty space from the list of
characters; otherwise, a dash will
appear in that space.
9. Repeat steps 1-8 for other chan-
nels. You can assign a label to each
channel.
10. Press EXIT to return to normal viewing.
CH LABEL :CH 025
SET
LABEL
– – – –
:ADJUST SET:ENTER
END:EXIT
Note:
The character will change as below.
SPACE
—
+
—
To erase channel labels:
1. Select a channel with a label.
2. Press MENU, then press or until the
OPTION menu appears.
3. Press ▲ or ▼ to highlight CH LABEL.
4. Press or to display the CH LABEL
menu. SET/CLEAR will be highlighted.
5. Press or to highlight CLEAR.
6. Press ENTER.
7. Repeat steps 1-6 to erase other channel
labels.
Labeling channels
Channel labels appear over the channel number display each time you
turn on the TV, select a channel, or press the Recall button. You can
choose any four characters to identify a channel.
To create channel labels:
1. Select a channel you want to label.
2. Press MENU, then press or
until the OPTION menu appears.
3. Press ▲ or ▼
to highlight CH
LABEL.
4. Press
to display the CH LABEL
menu. SET/CLEAR will be high-
lighted.
5. Press or to highlight SET.
6. Press ▲ or ▼ to highlight LABEL.
7. Press or to enter a character in
the first space. Press the button
repeatedly until the character you
want appears on the screen. Press ENTER.
Menu/
Enter
Exit
Channel
Numbers
OPTION
ON TIMER
FAVORITE CH
CH LABEL
VIDEO LABEL
OFF
:SELECT :ADJUST
CH LABEL :CH 025
SET / CLEAR
LABEL
— — — —
:ADJUST SET:ENTER
END:EXIT
TV/Video
Using the TV’s Features
J3R50121A(E)P25-31 12/08/2004, 10:51 AM29
