35
English
3.6 Adjusting Setup Settings
1 Press MENU to enter the OSD Main
Menu screen.
2 Press / on the remote control or
CHS
/ CHT on the control panel to select
Setup menu.
3 Press / OK on the remote control or
INPUT on the control panel to enter the
Setup menu.
4 Press / on the remote control or CHS / CHT on the control panel to select
an item.
5 Press / OK on the remote control or INPUT on the control panel to enter the item.
6 Press / on the remote control or VOL+/ VOL- on the control panel to change
the scales or press OK on the remote control or INPUT on the control panel to mark
an item.
7 Press RETURN to return to the Setup menu.
8 Press MENU to exit the Setup menu.
9 The Setup menu can be used to adjust the Setup Wizard, OSD Language, OSD
TIme, Clock Mode, Clock Set, Time Zone, Sleep Time, Vivid Motion, CC Mode,
Analog CC, and CC Style settings. Clock Set is only available for adjustments when
Clock Mode is set to Manual; Clock Mode can be set to Auto or Manual.
• Setup Wizard can be used to set up OSD Language, Clock Mode, Time Zone,
TV RF Source, and Channel Scan.
• The five available OSD languages are: English, Spanish, French, Traditional
Chinese, and Simplified Chinese.
• OSD Time can be set to 10 secs, 20 secs, 30 secs, and 60 secs.
• The Time Zone can be set to Eastern, Central, Mountain, Pacific, Alaska, and
Hawaii.
• The Sleep Time can be set to Sleep Off, 15 mins, 30 mins, 45 mins, 60 mins, 90
mins, and 120 mins.
• The Vivid Motion can be set to Off, Low, Medium, and High.
10 To change settings in CC Mode, Analog CC, Digital CC, and CC Style, press /
on the remote control to select the items and press / OK to activate the item.
Note:
The items available on the OSD may vary depending on the input signal source.
Picture
Audio
Channel
V-CHIP
Setup
Setup Wizard
OSD Language
OSD Time
Clock Mode
Clock Set
Time Zone
Sleep Time
Vivid Motion
CC Mode
Next Page
ExitReturnEnter
OK
Menu
Move
Return
