33
SET THE TIME
• To set the current time, press CAL when set time
panel is displayed. The time format is hh:mm.
The hour value and “CFM” tag will start
blinking.
• Press the UP or DOWN keys to set the hour
value.
• Press LOG/CFM or READ
to start editing the
minutes. The minutes value will start blinking.
• Press the UP or DOWN keys to set the minutes
value.
Note: To edit the hour again, after the minutes
were edited, press READ
.
• Press LOG/CFM to save the new time. The new
set time will be displayed.
Alternatively, press CAL to exit without saving
the changes.
SET INSTRUMENT ID
The instrument ID is a four digit number that can
be edited by the user. The instrument ID is
downloaded on the PC application, together with
the logged data. By setting a different ID for each
instrument it is possible to mix information from
many turbidimeters into the same database.
• To set the instrument ID, press CAL when set
instrument ID panel is displayed.
The default instrument ID is 0000. The existing
ID value and “CFM” tag will start blinking.
• Press the UP or DOWN keys to set the new
instrument ID. By pressing and holding the UP
or DOWN keys, the changing speed wil increase.
