2121
2121
21
DVI-DMS cable DMS connector
DVI connector
Step 2. Install the standard Radeon (CrossFire
TM
Ready) graphics card to AGI Ex-
press slot (PCI Express x4). For the proper installation procedures, please
refer to section “Expansion Slots”.
Connect the DVI-DMS
cable to DVI connector of
the compatible standard
Radeon (CrossFire
TM
Ready) graphics card.
Standard Radeon
(CrossFire
TM
Ready)
graphics card
Standard Radeon
(CrossFire
TM
Ready)
graphics card
Radeon CrossFire
TM
Edition graphics card
DVI connector
Standard Radeon (CrossFire
TM
Ready)
graphics card
There are two DVI connectors on the
standard Radeon (CrossFire
TM
Ready)
graphics card. Please connect the DVI-DMS
cable to the correct DVI connector; otherwise
, the graphics card will not work.
Step 4. Correctly connect the DVI-DMS cable to the monitor connector and two
graphics cards that you install. (If you install two standard Radeon
(CrossFire
TM
Ready) graphics cards to this motherboard, please skip this
step.)
1. You are allowed to install two CrossFire
TM
Edition graphics cards to both slots, or you
may use one CrossFire
TM
Edition graphics cards and a compatible standard Radeon
(CrossFire
TM
Ready) graphics card from the same series.
2. For ATI
TM
Radeon X1300, X1600, X1650 and X1950Pro series, there are no CrossFire
TM
Edition graphics cards. You can still install two regular graphics cards from the same
series on PCIE1 slot and AGI Express slot (PCI Express x4) to support CrossFire
TM
.
Besides, please connect the monitor cable to the graphics card on PCIE1 slot.
Step 3. Install the Radeon CrossFire
TM
Edition graphics card to PCIE1 slot. For the
proper installation procedures, please refer to section “Expansion Slots”.
