1. Manuals
  2. Personal Care Support
  3. Pride Mobility Support
  4. Mobility Aid Support
Support User Manuals
Question About Pride Mobility Mobility Aid JET2
I can't get my unit to move at all....

Jet 2-It is only about 2 years old and has never really been used. When having my carpet removed I drove over a big hump of carpet. When on top the unit cut off. Since I have recharged and checked everything I know how to do and can't get it to do anything. Is there a safety cut off or a fuze or something simple I can check?

Asked by Sharon on 04/15/2009 2  Answers

ManualsOnline posted an answer 15 years, 2 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

John posted an answer 15 years, 2 months ago

0 Perhaps coming off the bump might have tripped or hit the lever in the back that puts the vehicle into free wheel mode. Look under the back, under the plastic covering the rear axle and see if there is a short lever (many times it is near the right rear wheel). Can you move it up or down? It may have just jumped out of position. Try pushing it either all the way up or all the way down, it may take some effort. Turn the key on after moving in each way. If one way works, your done! Remember the other way as sometimes you'll need to freewheel the unit from time to time. Hope this helps. Another suggestion, turn the key on and watch for blinking lights. If the power light blinks say 3 times, or 5 times, or however many, the number indicates a problem that your owners manual will have a solution for.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual