Quick Start Guide
©2004 by Sony Corporation
Ecological Paper - Totally Chlorine Free
4-102-917-11 (1)
Printed in Spain
Thank you for purchasing this Sony
product.
After following this step by step guide
you will be able to:
Insert Batteries into the Remote
Control.
Connect the AC Cable, Aerial and
VCR to your TV.
Stabilize the TV set.
Select the language of the menu
screens.
Select the country in which you wish
to operate the set.
Tune your TV.
Change the broadcast channels into
a different order.
View TV Programmes.
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmentally friendly way.
• Use the supplied mains lead (Type C-4, Type BF or Type C-5, see step 1).
• Use the supplied coaxial cable for aerial connection.
• The Scart lead is optional, however if you use a Scart lead to connect your VCR it can improve
picture and sound quality when using it.
• For more details of VCR connection, please refer to the section “Connecting Optional
Equipment” on page 38 of the instruction manual.
If you do not have a Scart lead, after automatically tuning the TV, tune in the VCR test signal to
the TV programme number “0” by using the “Manual Programme Preset” option. (for details of
how to manually programme these presets, see page 28, step A of the instruction manual).
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
1 Remote control (RM-Y1010): 2 Batteries (AA size): 1 Coaxial Cable:
2 Anchor attachments: 1 Cleaning Cloth: 1 AV Mouse:
1 Main Lead (Type C-4):
Use these mains leads
(with safety earth) if
you use the set
outside the United
Kingdom and Ireland.
1 Clump Belt:
1 “Notes on Plasma” book.
1 Main Lead (Type BF):
• Use these mains leads
(with safety earth) if you
use the set in the United
Kingdom.
• See “NOTICE FOR
CUSTOMERS IN THE
UNITED KINGDOM
and IRELAND” on
page 2 of the
instruction manual when
using these mains leads.
• These mains leads may not
be supplied depending on
the country.
1 Main Lead (Type C-5):
• Use these mains leads (with
safety earth) if you use the
set in the Swiss
Confederation.
• These mains leads may not
be supplied depending on
the country.
Do not remove ferrite cores.
Do not remove ferrite cores.
Do not remove ferrite cores.
of the instruction manual.
are complete.
are complete.
After setting up, secure the TV set to a wall, pillar, etc, using the supplied anchor
attachments, for a safety purposes.
1 Remove the two screws attached to the upper rear side of te TV set.
2 Replace the two screws with the two supplied anchor attachments.
3 Secure a wall anchor bracket (not supplied) to a solid wall or a pillar.
4 Pass a strong cord or chain trough both holes of the anchor attachments and then secure to a wall
or pillar, etc.
Connecting the AC
Cable, Aerial and VCR
Checking the
Accessories Supplied
KE-P37XS1
KE-P42XS1
4
Stabilizing the TV set
1
GB
3
Inserting Batteries into
the Remote Control
2
