Quick Start Guide
©2002 by Sony Corporation
Ecological Paper - Totally Chlorine Free
4-093-109-
01
(1)
Printed in Spain
Thank you for purchasing this Sony
product.
After following this step by step guide
you will be able to:
Insert Batteries into the Remote
Control.
Connect the Display Unit to the Media
Receiver Unit.
Connect the AC Cable, Aerial and VCR
to your TV.
Select the language of the menu
screens.
Select the country in which you wish to
operate the set.
Set the current time.
Tune your TV.
Change the broadcast channels into a
different order.
View TV Programmes.
Make sure you insert the supplied batteries using the correct polarity.
Always remember to dispose of used batteries in an environmentally friendly way.
• Use the supplied display interface cable.
• Use the supplied mains lead for the display unit (Type C-4, Type BF or Type C-5, see
step 1).
One Remote Control
(RM-972):
Two size AAA batteries
(R03 Type):
One Display Interface Cable:
One Coaxial Cable: One Cleaning Cloth: One AV Mouse:
Two Mains Leads (Type C-4):
Use these mains leads (with
safety earth) if you use the
set outside the United
Kingdom.
One Mains Plug holder:
Two Mains Leads (Type BF):
•Use these mains leads
(with safety earth) if you
use the set in the United
Kingdom.
• See “NOTICE FOR
CUSTOMERS IN THE
UNITED KINGDOM” on
page 2 of the instruction
manual when using the
mains leads.
• These mains leads may not
be supplied depending on
the country.
Two Mains Leads (Type C-5):
•Use these mains leads (with
safety earth) if you use the
set in the Swiss
Confederation.
• These mains leads may not
be supplied depending on
the country.
Do not remove ferrite cores.
Do not remove ferrite cores.
Do not remove ferrite cores.
Do not remove ferrite cores.
m
<
BLACK
WHITE
DISPLAY SIGNAL IN
SONY EXCLUSIVE CABLE ONLY
AC IN
2 Secure the mains plug to the display’s AC IN jack.
AC IN (Power
supply input) jack of
the display unit
Mains plug
holder
(supplied)
Mains lead
(supplied)
b Clip on the AC IN jack until
you hear clicking.
a Attach the mains plug holder
(supplied) to the mains lead.
To unplug the mains lead pull down the mains plug holder by pushing in both
sides of the holder, then pull out the plug.
3 Install the display unit using the specified wall-mount bracket or stand.
Before installing the display unit, check the installation instructions of your wall-
mount bracket or stand.
4 Connect the supplied
display interface cable to
the media receiver unit.
1/
R/D/D/D
55
L/G/S/I
Y
CTRL
S
CENTRE
SPEAKER IN
180W (6 ) MAX
P
B/CB PR/CR
(SMARTLINK)
(SMARTLINK)
AV
MOUSE
W/G/W/GL/G/S/IR/D/D/D
2/
3/
4/
DISPLAY SIGNAL OUT
BLACK WHITE
AC IN
1 Connect the supplied
display interface cable and
the supplied mains lead for
the display unit to the
display unit.
Do not connect to the
mains before all
connections are
completed.
• Use the supplied mains lead for the media receiver unit (Type C-
4, Type BF or Type C-5, see step 1).
• Use the supplied coaxial cable for aerial connection.
• Other connecting cables are not supplied.
• The Scart lead is optional, however if you use a Scart lead to connect your VCR it
can improve picture and sound quality when using it.
• For more details of VCR connection, please refer to the section “Connecting
Optional Equipment” on page 61 of the instruction manual.
If you do not have a Scart lead, after automatically tuning the TV, tune in the VCR
test signal to the TV programme number “0” by using the “Manual Programme
Preset” option. (for details of how to manually programme these presets, see page 39,
step A of the instruction manual).
Refer to your VCR instruction manual to find out how to find the output channel of
your VCR.
Connecting the
Display Unit to the
Media Receiver Unit
Checking the
Accessories Supplied
KE-42MR1
KE-50MR1
34
Connecting the AC
Cable, Aerial and VCR
1
GB
Inserting Batteries into
the Remote Control
2
1/
R/D/D/D
55
L/G/S/I
Y
CTRL
S
CENTRE
SPEAKER IN
180W (6 ) MAX
P
B
/C
B
P
R
/C
R
(SMARTLINK)
(SMARTLINK)
AV
MOUSE
W/G/W/GL/G/S/IR/D/D/D
2/
3/
4/
DISPLAY SIGNAL OUT
BLACK WHITE
AC IN
1/
R/D/D/D
55
L/G/S/I
Y
CTRL
S
CENTRE
SPEAKER IN
180W (6 ) MAX
P
B
/C
B
P
R
/C
R
(SMARTLINK)
(SMARTLINK)
AV
MOUSE
W/G/W/GL/G/S/IR/D/D/D
2/
3/
4/
DISPLAY SIGNAL OUT
BLACK WHITE
AC IN
OUT IN
VCR
Connect the supplied
coaxial cable.
Connect the supplied mains
lead (Type C-4, Type BF or
Type C-5, with safety earth).
Scart lead is optional.
Connecting an aerial
Connecting a VCR with an aerial
Connect the supplied
mains lead (Type C-4,
Type BF or Type C-5, with
safety earth).
