Filter
Top Products
4
CONTROLS
Meter Description
1. Laser pointer
2. IR sensor
3. Measurement trigger
4. LCD display
5. Function buttons*
6. Battery compartment
Function Buttons
• Max/Min: Select Max or Minimum display.
• °C/°F: Select temperature units
• Backlight / Laser Pointer: For turning the LCD backlight or the Laser pointer ON/OFF
DISPLAY DESCRIPTION
1. Displays SCAN when trigger is depressed;
2. Displays HOLD when trigger is released
3. Laser pointer ON
4. Emmisivity setting (0.95)
5. Temperature units
6. Low battery
7. Max/Min display
8. Temperature display
BATTERY INSTALLATION
When the low battery symbol appears on the LCD, replace the meter’s
battery (9V). The battery compartment is located in the rear of the handle.
Open the compartment by carefully pulling the panel down. The panel is
hinged at the bottom and does not completely disconnect from the meter.
Replace the 9V battery and close the battery compartment cover.