Specification sheet UHP Replacement Lamps
Information in this document is subject to change without notice.
Document#: PHI/378-May.28-2008 Page 1 of 3
Philips UHP 100W/120W 1.0 E23
1. Specifications
• Customer part#:…………………PHI/378
• Lamp Application:………………..RP-TV
• Reflector type:…………………...Elliptical E23
• Arc gap:………………………….1.0 mm
• Power:…………………………...100W/120W
• Ignition voltage:………………….Ignition voltage 20kV ± 5kV
• Light output typical * :…………..4100 lumen (in 120W mode)
• Average Life time ** :…………...> 6000 hrs
• Environmental:…………………...RoHS and WEEE compliant
Side and back view of lamp. All dimensions ±0.5mm.
* : Lumen at aperture 4mm on pot
** : Ballast type Test conditions on UHP 120W electronic power supply (EUC-120P/11) stabilized at 120W
