A SERVICE OF

logo

Open as PDF
next previous
Trayless Hot-swap Backplane Manual
1 x 5.25" to Slim ODD & 2 x 2.5" HDD Hot-Swap Trayless Drive Cage
• Interface: Supports SATA III (6.0Gb/s)
• Fits 2.5” SATA hard disk
• Supports hot swap
• Weight: 565g
• Dimensions: 142(L) x 148(W) x 42(H) mm
• Operation Temperature:
Trayless hotswap backplane
SATA data cable
SATA+4PLED cable
Chassis xed screws
DVD-ROM xed screws
User’s Manual
Key
1 pcs
2 pcs
1 pcs
4 pcs
3 pcs
1 pcs
1 pcs
Accessories Quantity
Push 12.7mm slim optical drive into the slim drive bay.
After pushing the slim optical drive into postion to align with the
front panel, use screw to secure the optical drive.
Remove the slot cover of an empty oppy bay.
Carefully insert the drive cage into the bay and push it inward until
the drive cage’s screw hole is aligned with the hole of the bay.
1.
2.
3.
4.
5.
/ 1.25lb
/ 5.59” x 5.83” x 1.65”
/ 32~131 F
Secure the drive cage is packed with screws. use 2 screws on each
side to securely hold the device.
T-5K225T-SA
User’s Manual