Invacare Spree GT Mobility Aid User Manual


 
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
Invacare, the blue medallion
design and Infinity are regis-
tered trademarks and Yes,
you can., Compass, GT and
Personal Back10 are trade-
marks of Invacare
Corporation. Specifications
are subject to change with-
out notification.
© 2004
Invacare Corporation
Form No. 04-154
‘‘Invacare says ‘Yes, you
can,
and I couldn’t have
said it better myself.’’
Knee-to-heel*
Folding frames w/ seat rails min max
60˚ 13.50
"
17.50"
60˚ MFX 9
"
12.50
"
70˚ 13.50" 16.50"
70˚ MFX 12.75
"
16.25"
70˚ Tapered 5.75
"
11.75
"
Elevating 14
"
20
"
90˚ 4.50
"
7.50
"
* Range adjusts in 1" increments. Measurement taken from top of seat rail to back of
footrest.
Arm heights*
AT99N* 6.50" - 12.50"
AT55D* 8" - 14"
AT55F* 8" - 14"
TAD** Low Range 8" - 12"
TAF** High Range 10" - 16"
* Range adjusts in 1" increments. ** Range adjusts in 0.5" increments.
All measurements from top of seat rail to top of armrest. On AT55D and AT55F, add 1"
for upholstered arm pads. For less-seat-rail chairs, add 1.5" to above measurements (top of
upper frame rail to top of armrest.)
Spree GT Specifications*
Seat width 12"-16"
Seat depth 12"-16"
Overall chair width Seat width plus 8.50"
Back height 20" and 24"
Adjustable angle back 0˚, 10˚,20˚,30˚
Camber angles
Tubing outside diameter 1" frame,1" seat rail
Weight of chair 26 lb.** / 38 lb.***
Weight capacity 200 lb.
Limited warranty Lifetime on frames and crossbraces
* 0º Angle
** 18”x 16”, AT902, no rear wheels, no footrests, no anti-tippers, no wheel locks, no arms.
*** 18” x 16”, AT902, 24SP, PNEU, 70NTAPER, seat upholstery, back upholstery, wheel locks, no
arms.
Seat-to-floor-heights*
Caster 4" 4" 6" 6"
5ALUM
4SPLT 5SOFT AT902 1259
16.00
" 16.00" 16.00" 16.00"
12" Rear Wheel
16
.50
"16
.50
" 16.50"
17
.50
" 17.00" 17.50"
18"
14.50
" 14.50" 15.50" 16"
18" Rear Wheel 15
" 15" 16"
15.50" 15.50"
16
" 16"
15" 15" 15.50" 16"
20" Rear Wheel 15.50
" 15.50" 16" 16.50"
16" 16" 16.50"
17"
16" 16" 16" 16"
22"
Rear Wheel
16.50" 16.50" 16.50"
17" 17.50"
18"
n/a n/a 17" 18.50"
24"
Rear Wheel
18"
Invacare
®
Spree GT Wheelchair
Invacare
®
Spree GT
Wheelchair
ANSI/RESNA W/C19 sec 6.2 Presale Literature Notification - Spree GT
A.
Minimum turning radius 20.50".
Minimum turn-around width 32.41".
(14x14 SDR1216 Medium Frame chair without footrests).
B. Spree GT wheelchairs equipped with vent trays may be longer than 1220 mm, exceeding the ADA definition of a common wheelchair and the
minimum length requirements of lifts on public vehicles, and may therefore present particular difficulties accessing some vehicles.
C. Total wheelchair mass = 42.0 lb (19.0 kg) – including front riggings, anti-tips, tie-down brackets. Does not include wheel locks, wheelchair-
anchored pelvic belt, and seating.
D. Average lateral dummy displacement = approximately 0.51" (13 mm).
E. Overall Score = 17.
Overall Rating = A.
F. i . The Spree GT was sized to accommodate a 170 lb. test dummy. (Medium Frame, 18" W x 18D", 60 degree front rigging, 20" composite
wheels, 24" urethane tires, aluminum seat pan cushion, Invacare
®
Personal Back
10 seat system, 6x2" semi-pneumatic casters.)
ii.The Spree GT tested was tied down using four tie-down brackets - 2 brackets located near the front of the seat frame and 2 brackets
located on the rear of base frame.
iii.The Spree GT was tested with a 170 lb. test dummy.
iv. The Spree GT tested used a wheelchair-anchored pelvic belt and vehicle-anchored shoulder belt.
v. The Spree GT tested complies with the performance requirements of ANSI/RESNA W/C19 sec 5.3.
G. For all types of vehicles, the Spree GT requires four SAE J2249-compliant tie-down strap assemblies for effective securement.
H. When the TRO or TRBKTS option is selected, the Spree GT provides a location for anchoring of an Invacare-provided pelvic belt.
This belt has been tested in accordance with ANSI/RESNA W/C19.
I. The wheelchair-anchored pelvic belt is supplied by Invacare.