Filter
Top Products
1
NOTE: Check all parts for shipping damage and test
before use. In case of damage, DO NOT use. Contact
your equipment supplier for further instruction.
SAFETY SUMMARY
In order to ensure the safe installation, assembly
and operation of the Personal Seat VF these in-
structions MUST be followed:
WARNINGS/CAUTIONS notices apply to hazards
or unsafe practices which could result in per-
sonal injury and/or property damage.
WARNING
DO NOT install this equipment without first reading
and understanding this instruction sheet. If you are
unable to understand these instructions, contact
a healthcare professional, dealer or technical
personnel if applicable before attempting to
install this equipment - otherwise, injury or dam-
age may occur.
The best way to avoid problems related to pres-
sure sores is to understand their causes and
and your role in a skin management program.
Your therapist and physician should be con-
sulted if you have questions regarding individual
limitations and needs.
All cushions used for the prevention or treat-
ment of decubitus ulcers (pressure sores)
should be selected carefully. Working with your
your therapist, and physician is the best way to
assure that a cushion choice matches your in-
dividual needs.
As the needs of the individual become more
complex, the cushion evaluation becomes
more inportant.
Skin condition should be checked very fre-
quently after the provision of any new cushion.
INTRODUCTION
The Personal Seat VF cushion is designed to provide
pelvic stability, leg positioning and pressure manage-
ment for the user. The cover is made from a water
repellant fabric to protect the foam and the foam is
coated with a water repellant coating to provide addi-
tional protection.
Fastening Straps (Underside of Seat Cover)
Seat Cover
Personal
Seat Foam
ATTACHING THE CUSHION TO
THE SEATING SURFACE
The Personal Seat VF attaches to the wheelchair seat
upholstery using the hook and loop fasteners on the bot-
tom of the cushion cover.
NOTE: The zipper on the cushion should face rearward.
Wheelchair Seating Surface
1. Determine whether the wheelchair seating surface
has hook or loop attachment strips.
2. If the wheelchair has loop attachment strips, verify
that the double sided hook strips are securely attached
to the loop attachment strips on the bottom of the cush-
ion.
3. Align the front edge of the cushion with the front edge
of the seating surface.
4. Secure the cushion to the seating surface, making
sure that the double sided hook is securely attached
to the strips of loop on the cushion cover and the chair.
5. If the wheelchair has hook attachment strips, remove
the double sided hook strips from the cushion.
6. Align the front edge of the cushion with the front edge
of the seating surface.
7. Secure the cushion to the seating surface, making
sure that the strips of loop on the cushion cover are
securely attached to the strips of hook on the chair.
PERSONAL SEAT VF
TM
Assembly, Installation and Operating Instructions
VF
(Visco Foam)
Insert
FIGURE 1 - PERSONAL SEAT VF