Invacare 6358 Bathroom Aids User Manual


 
For more information regarding Invacare products, parts, and services, please visit www.invacare.com
Part No 1020707 1 Mobile Shower Commode Chair
Mobile Shower Commode Chair
Model 6358
SAVE THESE INSTRUCTIONS
NOTE:CheckALLpartsforshippingdamage.Ifshippingdamageisnoted,DONOTuse.Contact carrier/dealerforfurtherinstruction.
ƽ WARNING
DO NOT install or use this equipment without first reading and understanding these instructions. If you are
unable to understand the Warnings, Cautions or Instructions, contact a healthcare professional, dealer or
technical personnel before attempting to use this equipment - otherwise, injury or damage may occur.
All four casters MUST be in contact with the floor at all times.
ALWAYS inspect the mobile shower commode chair to ensure that it is properly positioned and stable
before using. DO NOT use if wobbly or unstable.
Users with limited physical capabilities should be supervised or assisted when using the mobile shower
commode chair.
The mobile shower commode chair is not to be used as a transfer bench, transfer device or climbing device.
Exercise caution when assembling to avoid pinching.
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching component parts
are secure.
The mobile shower commode chair has a weight limitation of 250 lbs (114 kg).
ALWAYS observe the weight limit on the labeling of your product. Check that all labels are present and
legible. Replace if necessary.
ƽ ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction with Invacare
accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not
recommended for use with Invacare products.
Assembling the Mobile Shower Commode Chair
NOTE:Forthisprocedure,refertoFIGURE 1.
NOTE:Todisassemblethemobileshowercommodechair,
reversethisprocedure.
1. Pressdownonthetabonthecasterwithyourfoot
untilthelockisengaged.Repeatuntilallfourcasters
arelocked.
2. Aligntheholesinthebacksupportwiththeholeson
theframe.Attachthebacksupporttotheframewith
fourscrewsandnuts.
3. Tightenallhardware.
4. Putthepailandlidinplaceonthepailholders.
NOTE:Toallowtheseattoeasilypivot,applyasmallamount
ofVaseline®orfurniturepolishtotheseatclampsbefore
snappingthem
intoplaceonthebackframerail.
5. Puttheseatontothebackframerail.
NOTE:Wheninstalledproperly,eachseatclampispositioned
outsidethepailholders(DETAIL“A”).
6. Pushdownontheseatuntilitsnapsfirmlyintoplace
ontothebackframerail.
Cleaning the Mobile Shower
Commode Chair
Useasoft,dampclothandmildsoaptocleantheshower
chair.
FIGURE 1 Assembling the Mobile Shower Commode Chair
Assembly, Installation and Operating Instructions
Back Support
Frame
Screw
(1 of 4)
Nut
(1 of 4)
Pail
Lid
DETAIL “A” - BOTTOM VIEW
Pail
Holders
Seat
Seat Clamps
(outside of the
Pail Holders
on the back
frame rail)
Pail Holders