Insignia NS-AC1200-C Pacemaker User Manual


 
Check out these important
safety instructions to keep
yourself and your devices safe.
Warning: Identifying the correct voltage and polarity settings
and adjusting the product is the user’s responsibility.
• This adapter should only be used with a 120V power
outlet. Follow all necessary safety precautions.
• Not recommended for use by children.
• Failure to adjust the adapter settings to match your
connected device’s requirements can result in damage
to the device.
Compatibility
Your device is compatible with this adapter if:
• The correct tip is available
• Your device’s voltage is between 3 and 12V DC
• Your device’s input does not require more than
1300mA (1.3A) of current (or 2100mA (2.1A) for 5V
connection)
• Your device has a positive polarity
BE
CAREFUL!
Quick Setup Guide
1300mA AC Adapter Set with USB Port
|
NS-AC1200 / NS-AC1200-C
Before using your new product, please read
these instructions to prevent any damage.
Package contents
Universal AC adapter
7 adapter tips
Quick Setup Guide
Features
Power
indicator
Power
cord
USB port
Choosing a tip
Carefully test the tips by gently inserting them into the
DC jack of your device. Choose a tip that ts snugly, but
do not force it to t.
Note: If you have your old adapter, you can compare the
connector of the old adapter to the available tips.
Setting up your adapter
You can nd your device’s input, polarity, and voltage on
the device itself, on its old adapter, or in its manual.
Contact the manufacturer if you cannot nd this
information. Using incorrect settings could damage your
device.
1 Check the input of the device you are connecting to
your adapter. If connecting a device using one of the
included tips, do not use this adapter if your device
requires more than 1300mA (1.3A) of current. If you
are connecting a USB device, do not use this adapter
if your device requires more than 2100mA (2.1A) of
current.
2 Check the voltage of your device, then slide the
voltage selector on your adapter to the same
voltage. Do not use this adapter if your device’s
voltage is not between 3 and 12V DC.
OR
If you are using a USB connection, slide the voltage
selector to 5V.
3 If you are using a USB connection, see “Using your
adapter.”
OR
Check the polarity of the device you are connecting
to your adapter.
• If your device has a positive polarity, connect the
chosen tip to the adapter’s connector.
• If your device has negative polarity, do NOT use this
adapter to power your device.
Voltage
selector
Connector
Tips
POSITIVE POLARITY
OR