Health O Meter 800KL Scale User Manual


 
www.healthometermedical.com
800KL Instruction Manual
Please read this instruction manual carefully before use.
1. There is a plastic film with a red arrow under the Lithium battery cover to prevent battery drain in shipping. Please remove the strip before continuing with these
instructions. Also, some models have a static cling label on the lens to prevent scratching. Please remove before use.
2. Your scale has been set at the factory to read weight in pounds. You may select kilograms or stone units of measurement by pressing the “kg/st/lb” button on the
bottom of the scale.
3. Place scale on flat, hard surface. Carpeted or uneven floors may affect accuracy.
4. Step on the scale (disregarding the reading) and step off. This process insures the scale is set and is now ready for use. Do this whenever the scale is moved.
At all other times step straight onto the scale.
5. Step onto the scale platform and remain still. The display will show “0.0”, then count up to your weight. The display will flash twice when the weight is locked.
Your weight is now displayed.
6. If you step off of the scale, the display will turn off automatically within 5 seconds. If you continue to stand on the scale, your weight will be displayed for 10
seconds and then the scale will turn off automatically.
Precautions
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap. Never use detergents, excess water, treated cloths, harsh cleaning
agents, or sprays. Do not attempt to lubricate or open scale casing.
2. Although your scale is designed to be maintenance-free, it contains sensitive electronic parts. Avoid rough treatment. Do not drop, kick, or jump on it. Treat it with
care to ensure the best performance.
3. This scale is designed to read weights between 25 and 400 lbs / 12 and 180 kgs / 2 and 28 st 8 lbs. To prevent damage, do not place more than
400 lbs / 180 kgs /28 st 8 lbs on it.
4. Do not store scale where you store cleaning chemicals. The vapors from some household products may affect the electronic components of your scale. Do not
store scale on its side.
5. This scale is an extremely sensitive weighing device. In order to prevent run down of the battery, do not store anything on the scale.
6. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the battery if the scale will not be used for a long period of time.
Battery Replacement
1. Use one 3 volt CR2032 lithium battery (as installed).
2. Open the battery compartment on the bottom of the scale by pushing the tab and lifting up the cover.
3. Remove the old battery from the compartment.
4. Place the new battery with the “+” sign up into the battery compartment.
5. Push gently down on the compartment cover until it clicks shut.
Low Battery
Your scale is equipped with a low battery indicator. It will display “LO” or readings will grow dim or become irregular if the battery needs replacement.
Trouble Shooting
1. Place your feet in the same position every time you weigh yourself. Stand still during measurement.
2. Weigh yourself without clothing whenever possible. Clothes can vary in weight.
3. Move the scale to a location where it won't be bumped. If your scale is bumped while being activated or while in use, an inaccurate reading may occur.
4. For the most consistent readings, weigh yourself at the same time of day. Allow for weight fluctuations due to food or drink in your system.
5. The maximum capacity of this scale is 400 lbs / 180 kgs / 28 st 8 lbs.. Should “Err ” appear on the display during a weighing, this indicates that the maximum
weighing capacity of the scale has been exceeded. Remove the weight immediately; otherwise, permanent damage may occur.