GE JTP28BF/CF/WF Oxygen Equipment User Manual


  Open as PDF
of 2
 
Dimensions and Installation Information (in inches)
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
JTP28BF/CF/WF
GE
®
30" Built-In Double Oven
KW Rating
240V
8.8
208V
6.6
Breaker Size
240V
40 Amps
208V
30 Amps
Listed by
Underwriters
Laboratories
R
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Cabinet
30"
A - Overlap of Oven Over Side Edges of Cutout
11/16"-3/4"
B
- Overlap of Oven at Bottom
of Cutout
1"
Oven
C
- Overall Depth
23-1/2"
D - Overall Height
52-7/8"
E - Overall Width
29-3/4"
Note:
Cabinets installed adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating. Electric wall ovens are not
approved for installation with a plug and receptacle. They must be
hard wired in accordance with installation instructions
.
Suitable oven
cabinet bracing must support 275 lbs.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
Specification Revised 7/05
320132
21" minimum
Door Opening
Allowance
B
B
A
A
Cutout height
51-13/16" MIN.
51-15/16" MAX.
Minimum cutout location
12" from the floor.
Cutout depth
23-1/2" MIN
5
47" to
bottom of
junction box
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
21
Cabinet
width 30"
C
E
D
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
Conduit
(48-1/2"
long)
Junction box
location
C
L
(Must Support 275 LBS.)
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
18"
over centerline
of cabinet