Escali 63D Scale User Manual


 
ENGLISH
Thank you for purchasing an
Escali Digital Scale.
How to weigh:
1) Press the “On/Off” button
2) “0g/0oz” will appear on display
3) Select measuring units (g, oz, kg/g, lb/oz) with the Kg/Lb button
4) Place item slowly on the panel
How to use the “Hold” feature:
This feature allows you to hold the weight of the item on the display
for 5 seconds.
1) Place the item slowly on the panel.
2) Press the “Hold” button. The word “Hold” will be displayed.
3) The weight will be fixed on the display for 5 seconds.
How to use the “Tare” feature:
This feature allows you to obtain the exact weigh of an item in a
container, by subtracting the weight of the container.
1) Place the container, without the item, slowly on the panel
2) Press the “Tare” button. The word “Tare” will appear on the
display and the weight of the container will be removed.
3) Slowly add the item to the container. The display will show the
weight of the item only
How to clear “Tare” Feature:
Press the “Tare” button again and the word “Tare” will disappear
from the display. Now the weight of all items will be displayed.
Selecting the Weight Mode:
1) Select measuring units (g, oz, kg/g, lb/oz) with the Kg/Lb button
2) Your scale will keep the last used weighing mode in memory, and
will return automatically to this mode when you turn the scale on.
Do not place overweight items on scale
Weighing items over the maximum weight capacity will cause an
“ERROR” to display. Immediately remove overweight items to avoid
causing damage to your scale.
Battery Replacement
Replace the batteries when the low battery symbol appears on the
display.
Additional Information
1) Make sure your scale is at room temperature, and on a stable
horizontal surface free of vibration.
2) This scale is not waterproof. Do not expose to moisture.
3) As this scale is a precision instrument, it must be handled with
extreme care. Avoid rough treatment, shaking and vibration.
4) Do not disassemble this scale or the warranty will be void.
5) The display value may be affected by electromagnetic
disturbances such as operating near a radio. If this occurs, move
the device that is causing the disturbance and turn the scale off
and restart.
Capacity: Model 63D & 63DS6.6 Lb / 3 Kg
Model 136D & 136DS – 13.2 Lb / 6 Kg
Increments: 1 gram, 0.1 ounce (1/10th oz.)
Weight Modes: grams, ounces, Kg/gm, and lb./oz.
Auto Shut Off: Turns off after 3 minutes of non-use.
Power Source: 9-volt battery
Escali’s liability is limited to two (2) times the cost of the product.
DEUTCH
Danke, dass Sie sich für eine Digitale Waage von Escali
entschieden haben.
Wägen:
1) Drücken Sie die On/Off Taste.
2) Oz oder gr erscheint im Display.
3) Wählen Sie die gewünschte Gewichtseinheit (mit Kg/Lb Taste).
4) Stellen Sie den Artikel langsam auf die Waage.
Wie benütze ich die Hold Funktion:
Diese Funktion ermöglicht die Gewichtsangabe, wenn Sie den Artikel von
der Waage genommen haben.
1) Stellen Sie den Artikel langsam auf die Waage
2) Drücken Sie die Taste Hold. Das Wort Hold erscheint im Display.
3) Nehmen Sie den Artikel von der Waage und das Gewicht bleibt 5
Sekunden auf dem Display sichtbar.
Wie benütze ich die Tara Funktion:
1) Setzen Sie den Behälter langsam auf die Waage.
2) Drücken Sie die Taste Tara. Das Wort Tara erscheint im Display und
das Gewicht des Behälters erlischt. Das Display zeigt die von Ihnen
gewählte Gewichtseinheit auf 0 an.
3) Füllen Sie langsam den Behälter, das Display zeigt nun das Gewicht
ohne Behälter an.
Wie lösche ich die Tara Funktion:
Drücken Sie erneut die Taste Tara und das Wort erlischt.
Stellen Sie keine Gegenstände auf die Waage die das maximal
zulässige Gewicht überschreiten
Gegenstände die das maximale Gewicht überschreiten verursachen das
Wort Error im Display. Entfernen Sie den Gegenstand sofort um Schaden
am Gerät zu verhindern.
Ersetzen der Batterien
Die Waage verfügt über eine „leere Batterie“ Anzeige. Wenn diese im
Display erscheint, ersetzen Sie bitte die Batterie.
Zusätzliche Informationen
1) Platzieren Sie das Gerät immer auf einer ebenen und stabilen
Unterlage. Benützen Sie das Gerät nicht bei extrem hohen und niedrigen
Temperaturen, dadurch könnte eine ungenaue Gewichtsanzeige
entstehen.
2) Dieses Gerät ist nicht wasserdicht.
3) Dies ist ein Präzisionsinstrument, behandeln Sie es mit Vorsicht und
setzen Sie es keinen Schlägen oder Stössen aus.
4) Versuchen Sie nicht das Gerät zu öffnen, durch unsachgemässes
behandeln erlischt der Garantieanspruch.
5) Die Anzeigeleistung des Displays kann durch elektromagnetische
Strahlungen gestört werden. z.B. wenn Sie in der Nähe eines Radios
arbeiten. Sollte dies passieren schalten Sie die Waage ab und entfernen
Sie das Gerät das die elektromagnetischen Strahlungen verursacht.
6) Wenn Sie die Waage länger als 1 Minut nicht benützen schaltet diese
automatisch ab.
Kapazität: Model 63D & 63DS3 Kg / 6.6 Lb
Model 136D & 136DS – 6 Kg / 13.2 Lb
Ablesbarkeit: 1 Gramm / 0.1oz
Gewichtsangaben: grams, ounces, Kg/gm, and lb./oz.
Stromverbrauch: 9 Volt (6LR61) Batterie
Escali´s Haftung beschränkt sich bis auf zwei mal den Warenwert dieses
Produktes.
FRANCAIS
Merci d’avoir acheté une balance digitale
Escali
Comment peser :
1) Appuyez sur le bouton Marche/Arrêt
2) 0g/0oz apparaîtra sur l’affichage
3) Sélectionnez l’unité de mesure (g, oz, kg/g, lbs/oz)
4) Placez l’article lentement sur le panneau
Comment utiliser la fonction «Maintien » :
Cette fonction vous permet de voir le poids d''un article apres que
vous l''ayez enleve du panneau.
1) Placer l’article lentement sur le panneau.
2) Appuyez sur le bouton « Maintien Le mot « Maintien » sera
affiché
3) Oter l’article. Le poids sera affiché pendant encore 5 secondes.
Comment utiliser la fonction « Tare » :
Cette fonction vous permet d’obtenir le poids exact d’un article dans
un conteneur en soustrayant le poids du conteneur :
1) Placer le conteneur sans l’article lentement sur le panneau
2) Appuyez sur le bouton «Tare ». Le mot « Tare » apparaîtra sur
l’affichage et le poids du conteneur sera enlevé. La valeur
affichée sera remise à 0g/0oz.
3) Remettez l’article lentement dans le conteneur. Ne sera affiché
que le poids de l’article.
Comment effacer la fonction « Tare » :
Appuyez sur le bouton « Tare » jusqu’à ce que le mot « Tare » ne
soit plus affiché. Maintenant le poids de tous les articles seront
affichés.
Ne placez pas des articles trop lourds sur la balance
Le pesage des articles qui sont au-dessus de la capacité de poids
maximum causera une ERREUR d’être affiché. Enlevez
immédiatement les articles trop lourds pour éviter de nuire à votre
balance.
Installation des piles
L’unité vient avec un indicateur de la décharge de la pile. Veuillez
changer les piles lorsque l’icône de l’alerte de pile faible apparaît.
Informations supplémentaires
1) Assurez-vous que votre balance est à la température de chambre
et repose sur une surface stable horizontale sans vibration.
2) Cette balance n’est pas étanche. Ne l’exposez pas à l’humidité.
3) Comme cette balance est un instrument de précision, prenez soin
lorsque vous la manipulez. Evitez de la malmener, secouer ou faire
vibrer.
4) Ne démantelez pas cette balance, sinon le garanti sera annulé.
5) La valeur affichée est susceptible à être influencée par des
perturbations électromagnétiques telles que l’opération près d’un
radio. Dans ce cas, enlevez l’appareil source de la perturbation,
mettez en arrêt la balance et recommencez.
Capacité : Model 63D & 63DS3 Kg / 6.6 Lb
Model 136D & 136DS – 6 Kg / 13.2 Lb
Précision : 1gramme ou 0.1 oz
Unités de mesure : Grammes, ounces, Kg/gm, and lb./oz.
Arrêt automatique : S’arrête automatiquement après 1
minute de non-utilisation
Bloc d’alimentation : Pile 9 volt
La responsabilité d’Escali est limitée à deux (2) fois le prix du
produit.