Filter
Top Products
Manual Supplement
00809-0200-4444, Rev AB
October 2014
8732EM Revision 4 Electronics Spare Parts Kit
Thank you for ordering a spare electronics kit for your 8732EM Revision 4 transmitter. Contained in this package
you will find the complete replacement electronics stack for your transmitter.
Prior to installing the spare electronics, it is important to verify that the transmitter housing you have is of the
correct design to accept the Revision 4 electronics.
Follow the steps below to confirm the transmitter housing is compatible with this electronics kit.
1. Verify the model number is 8732EM. If the transmitter model is not 8732EM, then these electronics are not
compatible. See Figure 1 for the location of the model number. If the model is 8732C, 8742C, 8732ES, or some
other model, then these electronics are not compatible with the enclosure. If you have one of these
transmitters, a full replacement transmitter will be required. Consult the 8700M Product Data Sheet
(00813-0100-4444) for details on ordering a new transmitter.
Figure 1. Transmitter Nameplate Location