Filter
Top Products
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING.
KEEP AWAY FROM
WATER
DANGER - Any appliance is elec-
trically live even when the switch is off. To
reduce the risk of death by electric shock:
1. Always unplug appliance immediately
after using.
2. Do not use while bathing.
3. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or
other liquid.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING - To reduce the risk of burns,
electrocution, fire, or injury to persons:
1. This appliance should never be left unat-
tended when plugged in.
2. Do not pull, twist, or wrap line cord
around appliance.
3. This appliance should not be used by, on
or near children or individuals with certain
disabilities.
4. Use this appliance only for its intended
use, as described in this manual. Do not
use attachments not recommended by the
manufacturer.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped or dam-
aged, or dropped into water. Return the
appliance to an authorized service center
for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening.
9. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
10. Unit is hot when in use. Do not let
heated surfaces touch eyes or bare skin.
11. Do not place the heated unit directly on
any surface while it is hot or plugged in.
12. Never block the air openings of the
appliance or place on a soft surface such
as a bed or couch, where the air openings
may be blocked. Keep the air opening free
of lint and other debris.
13. Do not use an extension cord with this
appliance.
14. Do not touch hot surfaces of the appli-
ance. Use handles or knobs.
15. Do not attempt to touch the housing
of your appliance near the straightening
plates, as it is hot when in use.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This deep wave iron is intended for house-
hold use. Use on Alternating Current (60
hertz) only. This unit is designed to be oper-
ated at 120 volts AC.
This appliance has a polarized plug (one
blade is wider than the other.) As a safety
feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
TO DEEP WAVE HAIR
Hair should be clean and damp or dry
before using the deep wave iron. For best
results, use a light styling product before
blow-drying hair. Plug the iron into an
electrical outlet. Turn on unit. The Power/
Low 285
º
F default setting will become
illuminated.
To turn off, press On/Off button. Never leave
your Deep Waver™ on and unattended.
However, should you fail to turn the unit off,
it will shut itself off automatically within
60 minutes.
WARNING: The Deep Waver
™
tourmaline
and ceramic-coated plates will get very
hot within a few seconds and should not
be placed in contact with the skin after
the Deep Waver™ has been turned on.
GETTING STARTED USING
YOUR DEEP WAVER
™
IRON
The iron’s unique 5 ultra-high heat temperature
settings and instant heat technology provide
styling versatility for all hair types. If you have
fine hair, a low temperature will provide the
best results. If you have thick, wavy or hard-
to-style hair, keep the heat setting on high. You
can vary the iron’s temperature according to
your particular need!
Start with a hair section that is 1
1
⁄2" wide
and no more than
1
⁄2" thick. Open the iron
and place a hair section between the two
hot plates, close to the scalp. Trap hair
between the plates by firmly squeezing the
handles together. Once deep wave is set,
release and move deep waver down hair
strand creating a series of deep waves.
At the end of hair section, release the
pressure on the handle and allow the
hair section to slide out. Repeat process
on additional sections of hair until you
achieve the hair style you desire. It may
be necessary to repeat process on certain
areas, depending on the texture of your hair.
Some experience is necessary when learning
to use this Deep Waver™. After using the iron
USING INSTANT HEAT, THE 5 ULTRA-
HIGH HEAT TEMPERATURE SETTINGS
& UNIFORM HEAT RECOVERY SYSTEM
This styling iron features a powerful
ceramic heater that maintains temperature
during use for precision styling. It heats up
to the temperature you’ve selected for your
hair type.
This Instant Heat technology has 5 ultra-
high heat temperature settings. There is a
temperature range that’s gentle and safe for
every type of hair, from the finest to the most
resistant and helps you create the look you
want. And that’s not all. Conair’s professional
salon standards of engineering provide you
with a uniform and improved heat recovery
system that maintains the iron at constant
temperatures. There is a constant surge of
power to ensure that heat is continuously and
quickly delivered for optimal styling results,
unlike other units that lose heat during use.
This provides consistent styling power so that
every strand of your hair is set with the same
level of heat and comes out the same way for
a perfect finish.
several times, you will learn the ideal way to
deep wave and style your hair.
STYLING WITH THE NEW EASY-GLIDE
TOURMALINE CERAMIC
™
COATED PLATES
The plates of your new
deep wave iron have a
tourmaline-infused easy-
glide ceramic surface,
the latest in technological
advances. The crushed
tourmaline jewels provide
ionic and infrared benefits, and combined
with ceramic technology produce the
ultimate in healthy, shiny,
silky hair. The Tourmaline
Ceramic™ surface also
helps smooth down
flyaways and frizzies. As
you deep wave your hair,
heat is evenly distributed
so that the style you create has silky, salon-
perfect deep waves. Hair also glides right
through the plates while styling.
The new Tourmaline
Ceramic™ technology
is a pleasure to work with,
makes styling your hair
easier and provides more
professional results.
You’ll find not only that hair
glides easily over the surface of the plates as
you’re styling, but it's simpler to clean styling
products residue, etc. off after each use.
Temperature Setting Guide
LED TEMP. CONTROL HAIR TYPE
Power/Low 285
º
F
Delicate, thin, easy-to-style hair
Medium
310ºF
Average to thick or treated hair
Med/High 330
º
F Thick hair
High/Max 360
º
F–395
º
F Hard-to-style hair