Conair Foot Massager Pedicure Spa User Manual


 
14) Do not stand on or in the foot massager. Use only while seated. Place feet in massager and
remove feet from massager only while in a seated position.
15) Never operate on a soft surface, such as a bed or couch, where air openings may be blocked.
16) Use heated surface carefully. May cause serious burns. Do not use on sensitive skin areas
or in the presence of poor circulation. The unattended use of heat by children or incapacitated
persons may be dangerous.
17) To prevent scalding, never add boiling or steaming water to the foot spa.
18) This appliance is designed for household use only.
OPERATING INSTRUCTIONS
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than
the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If is still does not fit, contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If is still does not fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
CAUTIONS:
1) Consult your doctor before using in case of illness or medical condition, including but not
limited to pacemaker use, pregnancy, cancer, infection, fracture or persistent pain.
2) Do not use on any unexplained pain or swollen muscles, or following a serious injury, before
consulting your physician.
3) Do not use if you have any of the following conditions: diabetes, tuberculosis, benign or
malignant tumors, phlebitis or thrombosis, hemorrhages, open or fresh wounds, ulcerated
sores, varicose veins, poor circulation or bruised, discolored, burned, broken, swollen or
inflamed skin.
4) This product should not be used by any individual suffering from a condition that limits or
altogether inhibits the user’s capacity to feel or have sensation in any part of the body.
5) If you experience pain in a muscle or joint for a prolonged period of time, discontinue use
and consult your doctor. Persistent pain could be a symptom of a more serious condition.
6) Use of this product should be pleasant and comfortable. Should pain or discomfort result,
discontinue use and consult your physician.
7) Never use while sleeping or drowsy.
8) Ensure that your hands are dry when operating the controls or removing the plug.
9) Do not use while bathing or showering. Use only in a dry area.
10) Always unplug the unit from the electrical outlet immediately after using and before
cleaning.
11) Keep out of reach of children.
USER/MAINTENANCE INSTRUCTIONS
1) Make sure foot bath is unplugged and is in the OFF position.
2) When transporting foot bath, position hands on opposite sides of foot bath for most secure
grip.
3) Place foot spa on floor, fill foot bath with warm or cold water, and plug into wall outlet. Never
plug or unplug the foot bath while your feet are in water.
4) The heat setting is designed to maintain the temperature of warm water, not to heat water.
5) Sit in a chair and place your feet in the water. Never stand in foot bath.
6) Select foot bath feature by pushing on/off button for bubbles and heat.
7) Choose one of the 3 attachments and place on post in the center of the foot bath. Place foot
on attachment and apply pressure. Move your foot around for more pressure and treatment.
8) To clean foot spa, rinse with water. (Never submerge unit in water.) Wipe with damp cloth. Do
not use any strong chemical cleaners such as benzine.
9) Fill foot bath with warm or cold water to the level indicator “Max.” Do not fill above water-level
indicator. Never overfill.
10) Pour water out of the foot bath from the side opposite the line cord only.
11) Do not hang unit from power cord.
12) Store unit in its box or in a clean, dry place. Wrap power cord loosely around tub feet.
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed,
including the following: Read all instructions before using this appliance.
DANGER– To reduce the risk of electric shock:
1) Always unplug this appliance from the electrical outlet immediately after using and before
cleaning.
2) Do not reach for an appliance that has fallen into water. Unplug immediately.
3) Do not use while bathing or in a shower.
4) Do not place or store appliance where it can fall or be pulled into a tub or sink.
Do not place or drop into water or other liquid.
WARNING– To reduce the risk of burns, fire, electric shock, or injury to persons:
1) An appliance should never be left unattended when plugged in.
Unplug from outlet when not in use, and before putting on or taking off parts.
2) Do not operate under blanket or pillow. Excessive heating can occur and cause fire,
electric shock, or injury to persons.
3) This appliance should not be used by, on, or near children, or individuals with certain disabili-
ties.
4) Use this appliance only for its intended use as described in this manual.
Do not use attachments not recommended by Conair.
5) Never operate this appliance if it has a damaged cord or plug, if it is not working properly,
or if it has been dropped or damaged, or dropped into water. Return the appliance to a Conair
Service Center for examination and repair.
6) Do not carry this appliance by supply cord or use cord as a handle.
7) Keep the cord away from heated surfaces.
8) Never operate the appliance with the air openings blocked. Keep the air openings
free of lint, hair and other debris.
9) Never drop or insert any object into any opening.
10) To disconnect, turn all controls to the OFF position, then remove plug from the outlet.
11) Do not use outdoors.
12) Do not operate where aerosol (spray) products are being used or where oxygen
is being administered.
13) Do not attempt to plug or unplug unit while feet are in the water.
This unit has a two-wire double-insulated polarized plug.
SAVE THESE INSTRUCTIONS
SERVICING OF DOUBLE-INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product, nor should a means for grounding
be added to the product.
Servicing a double-insulated product requires extreme care and knowledge of the system, and
should be done only by qualified service personnel. Replacement parts for a double-insulated
product must be identical to the parts they replace. A double-insulated product is marked
with the words “DOUBLE INSULATION” or “DOUBLE INSULATED.” This symbol (square with a
square) may also be marked on the product.