Filter
Top Products
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL2-1411
149
TWO
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
BI-AXIAL HORN WITH GIMBAL-MOUNT
BIA-100
FEATURES
• High-Efficiency Bi-Axial Horn Provides 130˚ x 60˚ Wide-Angle
Sound Coverage
• Combine with PD Series Drivers
• Nominal Frequency Response of 350-8,000 Hz for High-Intelligibility
Voice, Signaling and Full-Range Music in Indoor/Outdoor Applications
• Patented 180˚ Gimbal-Mount for Installation Flexibility
• Accepts All Atlas Sound and 1
3
⁄8" - 18 Thread Compression Drivers
with Throat Openings of 0.7" Dia.
APPLICATIONS
Bi-axial horn Model BIA-100 delivers outstanding sound dispersion
and audio efficiency when used with medium or high powered
compression drivers. Unit features exponentially-flared projectors
which eliminate phase cancellation, control low-frequency roll off
and offers maximum results in professionally-applied voice, music
and signaling systems. It can be surface or flange-mounted and is
ideal for use as a mid-range component for two and three-way,
high-fidelity loudspeaker systems. Weather-resistant construction is
suitable for permanent or portable installation in church, recrea-
tion/sport centers, mass transit terminals, industrial, commercial,
educational and institutional facilities.
GENERAL DESCRIPTION
Model BIA-100 is the original reflex horn featuring a bi-axial design
with twin air columns and exponential bell for wide-angle coverage
with a linear frequency response. The horn provides excellent
acoustic loading maintained to a 350 Hz low-frequency roll-off and
optimizes delivery of high and mid-range signal levels. BIA-100 is
designed for use with Atlas Sound PD Series compression drivers
and models having 1
3
⁄8
" -18 male threads and 0.707" dia. throat
openings. Refer to PD Series compression driver specification
sheets for high-pass filter requirements. Transformer-equipped
drivers are available (power-tap information is outlined on individual
compression driver specification sheets). The easily-mounted horn
features the labor-saving patented gimbal-mount bracket assembly
(U.S. Patent # 4,325,529) which allows for directional positioning
up to 180˚ vertically and horizontally. It includes a steel bracket,
cast-mounting base and provisions for flange installation. The
weather-resistant, non-glare matte black foam horn is resistant to
resonance. Bracket assembly is finished in durable epoxy. Overall
dimensions are 21"W x 10
1
⁄4"H x 19
1
⁄4"D (533 x 260 x 489 mm).
Weight is 16 lbs.
POWER SOUND LEVEL **DISPERSION IMPEDANCE
MODEL RATING PEAK *RP / 1M,1W / 1M
BIA-100 w/ PD-30 30 125dB 121dB, 107dB, 400-5200 Hz 8 ohm
BIA-100 w/ PD-5VH 40 126dB 121dB, 106dB, 300-6300 Hz 130
˚ x 60˚ 16 ohm
BIA-100 w/ PD-60A 60 128dB 125dB, 108dB, 300-6000 Hz 16 ohm
* Measured at Rated Power, 1 Meter (avg)
**Angle Shown for -6dB, 2 kHz Octave Band
BIA-100