Filter
Top Products
5
CHECK ALCI SAFETY
FEATURE EVERY TIME
YOU USE THE HAIR DRYER
Due to continuous improvements,
the appearance of your Safety
Plug may vary from the
illustration above.
This unit is provided with an
Appliance Leakage Current
Interrupter (ALCI) Safety Device
built into the plug. This device
will make it inoperable under
some abnormal conditions such as
accidental immersion in water. If
the appliance is immersed in
water, do not attempt to reset
the ALCI Safety Device. Please
take the unit to the nearest
service facility for examination.
The ALCI Safety Device is
equipped with a TEST Button so
that its operation can be
checked.
TO USE
1. Press the RESET Button on the
ALCI Safety Device.
2. Plug appliance into AC
electrical outlet.
3. Then press the TEST Button.
The RESET Button will pop
out. This verifies that the
Safety Device is operating
properly.
4. Should the RESET Button not
pop out, do not use the unit,
Contact Consumer Service for
examination and repair (See
Warranty Section).
5. Press the RESET Button to re-
activate your ALCI Safety
Device and use your
appliance.
NOTE: Be sure to repeat this test
every time you use the Hair
Dryer to confirm ALCI is
operational.
DRYER STOPPED
Disturbances in your electrical
current can trigger the Safety
Plug. Press the RESET Button on
the unit so it clicks. Your Hair
Dryer will resume operation.
AC1875PROHD_IB_13-2-03 2/13/03 12:35 PM Page 6